Key takeaways
- Compare the best crepe makers, from 13-inch electric griddles to carbon steel and cast iron stovetop pans, with specs, sizing tips, and care advice.
A good crepe comes down to three things: a thin, even layer of batter, steady heat across the whole cooking surface, and a rim low enough to slide a spatula under a delicate edge. Crepe makers are built around exactly that job, with flat plates or shallow pans that let you spread, swirl, and flip without tearing. The catch is that the category splits into two very different families, and picking the wrong one is the most common buying mistake.
Electric crepe makers carry their own heating element and thermostat, so the plate holds a set temperature while you work through a batch. Stovetop crepe pans borrow heat from your burner instead, which makes them smaller to store and, in carbon steel or cast iron, far longer lived. This guide compares five options across both families and flags the specs worth confirming on the listing.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
For most home cooks, an electric griddle-style maker such as the 13-inch Proctor Silex is the easiest route to even, repeatable crepes, because its thermostat holds the heat for you. Prefer a pan? The Cuisinart nonstick is the low-effort pick, the de Buyer carbon steel pan is the traditional tool, and the Lodge cast iron griddle is the versatile budget route.
1. Proctor Silex Electric Crepe Maker, 13-Inch
The Proctor Silex is the largest electric plate in this roundup, and that extra width is its main argument. A 13-inch surface gives batter room to spread into full-size crepes that hold savory fillings without folding over the edge, and the plate doubles as a breakfast griddle for eggs, pancakes, omelets, and quesadillas.
Heat control is the other strength. Eight heat levels let you run cooler for delicate dessert crepes and hotter for a darker, crisper edge, and the listing describes a PFAS-free nonstick surface. The box is unusually complete: a batter cup for consistent pours, a spreader for the classic T-shaped sweep, and an extra-large spatula sized for flipping wide crepes.
The trade-offs are footprint and cleanup. At roughly 14 by 13 inches it earns real counter space, and the surface needs to cool before wiping down; only the accessories are described as dishwasher safe. Small kitchens may prefer the 12-inch class below.
Specs
- Type: Electric griddle-style crepe maker
- Cooking surface: 13 inches, PFAS-free nonstick per listing
- Heat control: 8 heat levels with temperature dial
- Included: Batter cup, spreader, spatula
- Body: Stainless steel finish
- Wattage: Confirm on the listing
2. NutriChef Electric Crepe Maker and Griddle Cooktop, 12-Inch
NutriChef’s current 12-inch model (NCPCRM13) stands out for a reversible hot plate, a design detail few rivals offer. It suits cooks who want one compact appliance to cover crepes, pancakes, blintzes, and eggs without pulling out a separate griddle.
The control set is simple: an adjustable temperature dial with LED indicator lights, so you can see whether the plate is heating or holding temperature. The plate is nonstick aluminum, and the listing includes a wooden spatula and a batter spreader, the two tools crepe making requires. At about 12.5 by 13 inches overall, it stores a little easier than the 13-inch class while still turning out standard-size crepes.
This is the pick for smaller households that cook crepes a few times a month rather than every weekend. High-volume cooks will notice the smaller plate and single cooking zone; everyone else gets a tidy, self-contained unit for most flatbread and breakfast jobs. Confirm wattage and cord length on the listing, as NutriChef sells several similar 12-inch variants.
Specs
- Type: Electric crepe maker and griddle
- Cooking surface: 12 inches, nonstick, reversible hot plate
- Heat control: Adjustable dial with LED indicator lights
- Model: NCPCRM13
- Included: Wooden spatula, batter spreader
- Dimensions: About 12.5 x 13.2 x 3.1 inches per listing
3. Cuisinart Chef’s Classic Nonstick Crepe Pan, 10-Inch (623-24)
The Cuisinart 623-24 is the easy-care stovetop option: a hard-anodized aluminum pan with a nonstick interior, low tapered sides, and a stainless steel Cool Grip handle shaped to stay comfortable while you tilt and swirl. Hard-anodized construction spreads heat more evenly than thin stamped aluminum, helping the center and edges of a crepe brown at the same pace.
Because it is a pan rather than an appliance, it stores in a cookware drawer, needs no outlet, and can finish dishes in the oven; the listing rates it oven safe to 500 degrees Fahrenheit. That makes it useful beyond crepes, for omelets, pancakes, and reheating flatbreads.
Two limits to know. The listing does not state induction compatibility, so induction owners should look at the carbon steel or cast iron picks instead. And the nonstick interior calls for gentle utensils and hand washing if you want the coating to last, so confirm the current interior coating on the listing.
Specs
- Type: Stovetop crepe pan
- Size: 10 inches
- Material: Hard-anodized aluminum, nonstick interior
- Handle: Stainless steel Cool Grip, riveted
- Oven safe: Up to 500 degrees Fahrenheit per listing
- Induction: Not stated on the listing; confirm before buying
4. de Buyer Blue Carbon Steel Crepe and Tortilla Pan, 9.5-Inch
De Buyer’s blue steel pan is the traditional French creperie tool, made in France from uncoated carbon steel. There is no nonstick layer to wear out. Instead, the surface builds a natural patina through seasoning and regular use, and that seasoned finish is what releases crepes. The shallow, flared sides are shaped for the classic wrist-swirl and for sliding a thin spatula underneath without catching.
At 9.5 inches across with about a 7.75-inch cooking surface, it makes smaller, bistro-style crepes and suits standard home burners well. Carbon steel heats quickly, responds fast when you lower the heat, and works on every common cooktop, including induction.
The honest trade-off is upkeep. This pan must be seasoned, hand washed, and dried thoroughly, and it will rust if left wet. It rewards cooks who make crepes often and enjoy maintaining a pan that can last decades; if the maintenance sounds like a chore rather than part of the craft, choose the Cuisinart above.
Specs
- Type: Stovetop crepe pan
- Size: 9.5 inches overall, about 7.75-inch cooking surface
- Material: Blue carbon steel, uncoated
- Origin: Made in France
- Compatibility: All cooktops including induction per listing
- Care: Season before use, hand wash, dry fully
5. Lodge Cast Iron Round Griddle, 10.5-Inch (L9OG3)
The Lodge L9OG3 is not sold as a crepe pan, but its flat round surface and low rim do the same job, and it is the most versatile tool in this guide. It arrives pre-seasoned with vegetable oil, works on stovetops including induction, and can also go in the oven, on a grill, or over a campfire, so the same piece handles crepes, tortillas, dosas, pancakes, and quesadillas.
Cast iron’s strength is heat retention. Once preheated, the surface temperature barely dips when cool batter lands, so the eighth crepe cooks much like the first. That steadiness is what thin batter needs, and the pre-seasoned surface improves with regular use.
The compromises are weight and warm-up time. At about 4.5 pounds it is a two-handed lift for the swirl technique, so most cooks spread batter with a T-shaped spreader instead, and it needs a longer preheat than aluminum or carbon steel. In exchange you get a nearly indestructible griddle made in the USA.
Specs
- Type: Stovetop round griddle (crepe-capable)
- Size: 10.5 inches
- Material: Pre-seasoned cast iron
- Model: L9OG3
- Compatibility: Stovetop including induction, oven, grill, campfire
- Weight: About 4.5 pounds per listing
How to Choose a Crepe Maker
Start with the heat source. Electric makers hold a set temperature automatically, which removes the biggest beginner variable. Stovetop pans depend on your burner control but store smaller and last longer. If your cooktop is induction, check compatibility carefully: carbon steel and cast iron always work, while aluminum pans need a magnetic base and many listings simply do not state it.
Match size to your burner and your fillings. Eight to ten inches suits small dessert crepes and standard burners. Twelve to thirteen inches is the range for filled savory crepes and galettes, but a plate or pan wider than your heat source will brown unevenly.
Weigh coating against lifespan. Nonstick interiors release batter from day one and clean with a wipe, but coatings eventually wear. Carbon steel and cast iron demand seasoning and hand washing, then improve for years. The right choice depends on how often you cook and how much upkeep you accept.
Check the included tools. A batter spreader and thin spatula are close to essential. Electric models often bundle both; stovetop pans rarely do, so factor in buying them separately.
Who Should Skip a Dedicated Crepe Maker
Skip the purchase if you make crepes only once or twice a year: a low-sided skillet you already own will get you through an occasional brunch. Skip electric models if you have no spare counter or cabinet space, since a stovetop pan stacks with your other cookware. Skip carbon steel and cast iron if you will not season, hand wash, and dry a pan after use; a neglected pan rusts, and nonstick will serve you better. Finally, skip small 8-inch dip-style makers if you plan filled savory crepes, which need a 12-inch or larger surface.
FAQ
Is an electric crepe maker better than a stovetop pan?
Neither is better outright. Electric makers hold a steady temperature with no burner watching, which helps beginners and long batches. Stovetop pans are smaller to store, work anywhere there is a burner, and in carbon steel or cast iron can last decades. Choose based on your cooktop, storage, and how often you cook.
What size crepe maker should I buy?
Ten inches is the versatile middle for home burners and standard crepes. Go to 12 or 13 inches if you cook filled savory crepes or use the plate as a breakfast griddle. Stay at 9.5 to 10.5 inches if your burners are small, because a pan much wider than the heat source browns the edges slowly.
Can I make crepes in a regular frying pan?
Yes, with limits. A flat, low-sided skillet works for occasional crepes if you preheat it evenly and spread the batter quickly. Tall, steep sides make swirling and flipping harder, and a pan with a small base relative to its rim will cook unevenly. A dedicated pan simply removes those friction points.
How do I keep crepes from sticking?
For nonstick surfaces, preheat fully, use a thin film of butter or oil, and pour batter only when the surface is at temperature. For carbon steel and cast iron, keep the seasoning maintained, preheat gradually, and let the crepe set and release on its own before lifting an edge; forcing an early flip is what tears and sticks.
Final Verdict
Most buyers should start with the Proctor Silex 13-inch electric maker for its wide plate, eight heat levels, and complete tool bundle, or the NutriChef 12-inch if space is tighter. If you prefer a pan to an appliance, the Cuisinart 623-24 is the low-maintenance route, the de Buyer blue steel pan suits traditionalists willing to season it, and the Lodge L9OG3 griddle is the durable all-rounder. Either way, confirm size, cooktop compatibility, and included tools on the listing before ordering.
Worth a look next
- Best Electric Crepe Makers for Thin, Golden Crepes at Home
- Best Electric Bubble Waffle Makers: 5 Picks for Home Fun
- Best Electric Pie Makers: 5 Countertop Picks for Home Bakers
- Best Electric Turkish Coffee Makers for Rich Foam at Home
- Best Electric Cookie Presses: 5 Picks for Easy Spritz
- Best Electric Sandwich Makers: 5 Picks for Hot Melts



