Key takeaways
- Compare the best kegerators for draft beer, from a budget single-tap cabinet to dual-tap and built-in models, with keg fit, taps, and temperature specs.
The best kegerator for most home bars is a full-size single-tap cabinet with a complete dispense kit, and the EdgeStar KC2000 covers that brief with a half-barrel capacity, an included gas tank, and casters for moving it on cleaning day. If you want two beers pouring at once, the Kegco K309SS-2 adds a second faucet, digital temperature control, and room for oversized kegs. Home brewers should look at the Kegco HBK309B-2, which ships with ball lock fittings for Cornelius kegs, and anyone building a permanent bar should consider the Kegco HK38SSU-2, a 24-inch undercounter model with a commercial-grade dispense kit.
As an Amazon Associate, we earn from qualifying purchases.
A kegerator is a refrigerator built around one job: holding a keg cold and under steady gas pressure so every pour tastes like the first one. The five models below are all complete draft beer dispensers sold with towers, couplers, regulators, and gas tanks, so the comparison comes down to published specifications such as keg fit, tap count, temperature range, and dimensions. They span the main buying paths, from a budget single-tap cabinet to a dual-tap homebrew system and a built-in unit sized for a standard undercounter opening. Every pick holds at least one full-size keg.
Table of Contents
- How to Choose a Kegerator
- EdgeStar KC2000 Full Size Kegerator
- Kegco K309SS-1 Keg Dispenser
- Kegco HBK309B-2 Home Brew Kegerator
- Kegco K309SS-2 Dual Tap Kegerator
- Kegco HK38SSU-2 Undercounter Kegerator
- Kegerator Setup and Care Tips
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Kegerator
Keg Fit and Capacity
Keg fit is the first specification to check, because cabinets differ in which kegs they accept. A standard half barrel is the most common commercial keg, and every model here holds one. Slimmer formats include the quarter barrel, the pony keg, the sixth barrel, and the Cornelius kegs that home brewers fill. One important exception: the wider rubberized kegs sold by Coors and Miller do not fit every cabinet. The EdgeStar KC2000 excludes them, while the Kegco K309 cabinets are built to accept them. If you buy commercial kegs, match the coupler too. Most of these kits ship with American Sankey D-system couplers, while homebrew models ship with ball lock fittings instead.
Tap Count
A single tap is enough for one beer at a time and keeps the setup simple, with one set of lines to clean. Dual-tap models pour two kegs at once, usually two sixth barrels or a mix of smaller formats, which suits households that keep a lager and an ale on rotation. More taps also mean more lines, more faucets, and more cleaning after each keg kicks. Choose the tap count that matches how many beers you realistically pour in a month, not the number you imagine pouring at one party.
Temperature Control and Range
Draft beer is usually served cold, and a home kegerator holds a tapped keg under steady pressure for weeks. Analog cabinets like the EdgeStar KC2000 work in a narrower band, roughly the low 30s to the mid 40s in degrees Fahrenheit. Digital Kegco cabinets widen the range considerably, running from 32 to 75 degrees Fahrenheit on the K309 platform, which lets the same cabinet double as a fermentation chamber or a regular refrigerator between kegs. The built-in HK38SSU-2 covers 32 to 59 degrees, a range that also suits wine service. Fan-forced cooling, found on the Kegco models, circulates air so the temperature stays even from the top of the keg to the bottom.
Size, Placement, and Installation
Measure the space before ordering, including the tower. Freestanding cabinets in this roundup are about 20 to 24 inches wide and 33 to 34 inches tall before the tower goes on, and the tower adds roughly another foot of height. Leave clearance around a freestanding unit for ventilation, and never slide one into a tight cabinet opening unless it is rated for built-in use. The HK38SSU-2 is the built-in option here, sized for a 24-inch undercounter opening with front ventilation. Weight matters too: these cabinets run from about 90 pounds for the EdgeStar to about 179 pounds for the built-in Kegco, so plan the delivery route in advance.
What Comes in the Box
Every model below ships as a kit with a draft tower, faucets, a regulator, lines, and a carbon dioxide tank, but the details differ. Tanks ship empty, so budget time for a fill or exchange before the first pour. Homebrew kits swap the commercial coupler for ball lock tap sets, and the HBK309B-2 adds a two-product regulator so two kegs can run at different pressures. Stainless towers and couplers, standard on the HK38SSU-2 kit, resist corrosion better than chrome-plated parts over years of service.
EdgeStar KC2000 Full Size Kegerator
The EdgeStar KC2000 is the budget pick and the longest-running design in this roundup, a single-tap full-size cabinet that has been sold since 2007. It holds one half barrel, one quarter barrel or pony keg, or two sixth-barrel or Cornelius kegs, and it rolls on casters so it can move out for cleaning behind the bar. The reversible door helps it fit awkward corners in a game room or garage.
Temperature control is a simple dial working across a range from the low 30s to the mid 40s in degrees Fahrenheit, which covers standard serving temperatures for lagers and ales. The kit includes a 5-pound carbon dioxide cylinder, a regulator, and a single-faucet tower. The main limitation is keg shape: oversized rubberized kegs from Coors and Miller do not fit this cabinet, so buyers loyal to those brands should step up to a Kegco K309 model instead.
Specs:
- Model: KC2000
- Tier: budget
- Taps: 1
- Capacity: 4.9 cubic feet
- Keg fit: half barrel, quarter barrel, pony keg, or two sixth-barrel or Cornelius kegs
- Not compatible: oversized Coors and Miller rubberized kegs
- Temperature range: low 30s to mid 40s, degrees Fahrenheit
- Gas tank: 5 lb carbon dioxide cylinder, included, ships empty
- Dimensions: 20.19 x 25.69 x 34.13 inches
- Weight: about 90 lb
- Extras: rolling casters, reversible door, guard rail, drip tray
- Power: 115V, 60Hz
Kegco K309SS-1 Keg Dispenser
The Kegco K309SS-1 is the mid-range step up for buyers who pour one beer at a time but want digital control and wider keg compatibility. Its push-button thermostat and display replace the analog dial, and the published range runs from 32 to 75 degrees Fahrenheit. That wide band means the cabinet can ferment a homebrew batch at ale temperatures or serve as an ordinary refrigerator with the included shelves when no keg is installed.
Fan-forced cooling keeps the interior even, and the cabinet accepts any full-size keg, including the wider Coors and Miller rubber kegs that the EdgeStar cannot take, or up to three Cornelius kegs. The kit is a D-system setup with a single-faucet tower, a regulator, and a 5-pound aluminum carbon dioxide tank. A stainless steel door gives it a cleaner look for a finished kitchen or bar area.
Specs:
- Model: K309SS-1
- Tier: mid-range
- Taps: 1
- Finish: stainless steel door
- Control: digital thermostat with push-button controls and display
- Cooling: fan-forced
- Temperature range: 32 to 75 degrees Fahrenheit
- Keg fit: one full-size keg including Coors and Miller rubber kegs, or up to three Cornelius kegs
- Coupler: American Sankey D system
- Gas tank: 5 lb aluminum carbon dioxide tank, included, ships empty
- Dimensions: about 24 x 25 x 33.25 inches
- Extras: shelves included for refrigerator conversion
Kegco HBK309B-2 Home Brew Kegerator
The Kegco HBK309B-2 is the mid-range pick built specifically for home brewers. Instead of a commercial coupler, the kit arrives with two complete ball lock keg tap sets that connect directly to Cornelius kegs, plus a stainless steel dual-faucet tower so two homebrew batches can pour side by side. The cabinet holds up to three Cornelius kegs, leaving room for a third batch to carbonate or condition while two are serving.
The regulator is the other homebrew-friendly detail: the Kegco YH-762-2 is a two-product, dual-gauge unit, so each keg can run at its own pressure, useful when a highly carbonated style shares the cabinet with a softer one. The 5-pound aluminum carbon dioxide tank wears a red epoxy finish. Digital controls carry the same 32 to 75 degree Fahrenheit range as the other K309 models, so the cabinet doubles as a temperature-controlled fermentation chamber between batches. Note that commercial Sankey kegs need a separate D-system coupler, which is not part of this kit.
Specs:
- Model: HBK309B-2
- Tier: mid-range
- Taps: 2, ball lock homebrew fittings
- Finish: black
- Control: digital thermostat
- Temperature range: 32 to 75 degrees Fahrenheit
- Keg fit: up to three Cornelius kegs
- Included kit: two ball lock keg tap sets, 3-inch polished stainless steel dual-faucet tower
- Regulator: Kegco YH-762-2 two-product dual-gauge regulator
- Gas tank: 5 lb aluminum carbon dioxide tank with red epoxy finish, included, ships empty
- Dimensions: 23.6 x 23.9 x 33.25 inches
- Note: commercial kegs require a separate D-system coupler
Kegco K309SS-2 Dual Tap Kegerator
The Kegco K309SS-2 is the premium freestanding pick for households that want two commercial beers on tap. It pairs the K309 digital platform with a dual-faucet, 3-inch diameter tower and D-system couplers, so two sixth barrels can pour at once, or a single half barrel can run through one line. Like the single-tap version, it accepts oversized Coors and Miller rubber kegs that narrower cabinets reject.
Digital push-button controls hold the 32 to 75 degree Fahrenheit range, fan-forced cooling keeps both kegs at an even temperature, and the included shelves convert the cabinet to a refrigerator when it is not pouring. The kit includes a 5-pound aluminum carbon dioxide tank and a chrome guard rail. For most finished home bars, this is the most flexible freestanding configuration in the roundup: two taps, digital control, and the widest keg compatibility of the group.
Specs:
- Model: K309SS-2
- Tier: premium
- Taps: 2
- Finish: stainless steel door
- Control: digital thermostat with push-button controls and display
- Cooling: fan-forced
- Temperature range: 32 to 75 degrees Fahrenheit
- Keg fit: one full-size keg including Coors and Miller rubber kegs, or up to three Cornelius kegs
- Couplers: American Sankey D system
- Tower: 3-inch diameter dual-faucet draft tower
- Gas tank: 5 lb aluminum carbon dioxide tank, included, ships empty
- Dimensions: about 24 x 25 x 33.25 inches
- Extras: shelves included for refrigerator conversion, chrome guard rail
Kegco HK38SSU-2 Undercounter Kegerator
The Kegco HK38SSU-2 is the premium built-in pick, a 24-inch wide undercounter dispenser made to slide into a standard cabinet opening in a home bar or outdoor kitchen run. Its commercial-grade compressor is rated at 3200 BTU, the strongest cooling hardware in this roundup, and fan-forced circulation holds the cabinet anywhere from 32 to 59 degrees Fahrenheit, a range that covers cold beer service and warmer wine service from the same unit.
The X-CLUSIVE dispense kit upgrades the hardware throughout: a stainless steel tower, a regulator, a carbon dioxide tank, and keg couplers are all included, with two faucets for pouring two kegs. At about 179 pounds, this is a set-it-once appliance rather than a portable one, and its front-venting design is what allows the built-in installation the freestanding models cannot handle. Buyers planning a permanent bar with cabinetry should start here.
Specs:
- Model: HK38SSU-2
- Tier: premium
- Taps: 2
- Installation: built-in undercounter or freestanding, 24-inch width class
- Cooling: fan-forced, commercial-grade compressor rated at 3200 BTU
- Temperature range: 32 to 59 degrees Fahrenheit
- Included kit: X-CLUSIVE dispense kit with stainless steel tower, regulator, carbon dioxide tank, and keg couplers
- Dimensions: 24 x 25 x 34.13 inches
- Weight: about 179 lb
- UPC: 700697203592
Kegerator Setup and Care Tips
Every gas tank in this roundup ships empty, so the first task is a fill or exchange at a local gas supplier, welding shop, or beverage distributor. Once the keg is tapped, keep the cabinet closed as much as possible, and let a warm keg chill for a full day before judging the pour. Foamy first pours usually trace back to temperature or pressure, not the hardware, so adjust one variable at a time.
Clean the beer lines every time a keg kicks, and replace them on the schedule the line manufacturer publishes. Faucets and couplers should be disassembled and soaked during the same session. Wipe the drip tray and guard rail after gatherings, check the door gasket for a tight seal each season, and vacuum dust from the compressor area twice a year so the cooling system can breathe. A cabinet that is cleaned on schedule pours better and lasts longer, whichever model you choose.
Frequently Asked Questions
How many kegs fit in a full-size kegerator?
A full-size cabinet holds one half-barrel keg. In place of the half barrel, most models here accept two sixth-barrel kegs or up to three Cornelius homebrew kegs, depending on the model. Check the keg fit line in each product’s specs, because oversized rubberized kegs from Coors and Miller fit the Kegco K309 cabinets but not the EdgeStar KC2000.
Do kegerators come with a full carbon dioxide tank?
No. The tanks included with these models ship empty for safety in transit. A 5-pound tank can be filled or exchanged at gas suppliers, welding shops, and many beverage distributors. The tank size matters less than the regulator: dual-gauge and two-product regulators, like the one in the HBK309B-2 kit, make pressure management easier when two kegs pour at once.
Can a kegerator be built into cabinets?
Only models designed for it. Freestanding kegerators vent heat from the sides and back and need open clearance, so enclosing one in cabinetry can overheat the compressor. The Kegco HK38SSU-2 is built for undercounter installation in a 24-inch opening with front ventilation. If your bar plan includes cabinetry, choose a built-in rated model from the start rather than adapting a freestanding one.
What temperature should a kegerator be set to?
Most draft beer is served cold, and a tapped keg keeps best in the range these cabinets hold under steady pressure. Lagers pour well at the colder end of a cabinet’s range, while ales are often served a few degrees warmer. Digital models like the Kegco K309 series make small adjustments easy with push-button controls, while analog models like the EdgeStar KC2000 use a dial and cover the standard serving band.
Conclusion
For a first kegerator, the EdgeStar KC2000 remains the budget benchmark: a complete single-tap kit, half-barrel capacity, and casters, with the single caveat that oversized Coors and Miller kegs do not fit. The Kegco K309SS-1 adds digital control and full keg compatibility for one-tap buyers, the HBK309B-2 equips home brewers with ball lock fittings and a two-product regulator, and the K309SS-2 brings dual taps to the same flexible platform. The HK38SSU-2 stands apart as the built-in choice, with the strongest compressor and a stainless dispense kit for permanent bars. Match the cabinet to your kegs, your tap count, and your installation plan, and any of these five will pour properly cold draft beer at home.
Worth a look next
- Best Sausage Stuffers for Home Batches: 5 Vertical Picks
- Best Countertop Rotisserie Ovens: 5 Top Picks for Home Cooks
- Best Bread Machines: 5 Top Picks for Home Bakers in 2026
- Best Countertop Ice Makers: 5 Top Picks for Home Use
- Best Pizzelle Makers: 5 Electric Presses for Crisp Cookies
- Best Electric Ice Crushers: 5 Top Picks for Fluffy Snow Ice